Transverter for 6m Ten Tec 1208

Found it on flea market in Eskilstuna.

Effter byte av en bränd transistor, fixat en olödning på balunen in till PA:t, samt en överlödning på balunen. Fungerade transvertern, men biasen var tvungen att byggas om. Har minskat dämpningen in så att den nu fungerar med 3-4W in ca 8W ut, Nu blir det dax att bygga en portabel 6M yagi 3 element.

de sm4hng

Meas of the Capacitor Diode ISV149

This Can help me to get a working Xtal-filter. Haven't start this yet.

The Demodulate/Modulator SA612 is working. I need to adjust the LSB xtal, but i wait until the filter is finished to see where in frequency it should be pleased.  Also the level must be adjusted. No i will start solder the bi-direct amplifier.

Crystals

Lott of new experience this weekend. Using my new VNWA from http://www.sdr-kits.net/

I have measured Crystals from 2 - 32 MHz. i Have 10 HC-49S and 11 HC-49U 20 MHz. This was reserved for this project. Off the around 35 pics. i measured i put one in the trashcan. the is variation of Q and Rs in the samples. but the  HC-49S @ 20 MHz has a Q of 76000 - 90000 and should be okay.

A plot from the VNWA.

Amazing SW option included in VNWA sw.

I will later in this week hopefully mount lsb and usb crystal in the modulator/de-modulator.

QRP EDEN 20

Here is the backside of my MF. Now the Mic amplifier is there. Gain 13 - 33 dB. Current consumption 4.7 mA. Frequency response 3dB is 300Hz to 40 kHz. There is a filter between Mic amplifier and modulator. When i apply this it start oscillate at 1MHz but i solved it yesterday with 10 nF at gain potentiometer !
Next tonight i try to build the modulator SA612, and to finished i must desire MF frequency.

Murfe  has taken my oscilloscope, it is completely dark. So i leave the LF for now.

 Here is the block diagram. It is then easier to understand what i am building. Here is some more links ho has inspired me.
SV1DJG  QRP and Homebrewing
G4FUI Photos tagged with eden9

The original is named EDEN 9.
Do anyone have a better ides of using LM380 SMD component prefer 1-2W out ?
Nex time is the mic amplifier.

MF EDEN 20

Next stepp was to bild a LF amplifier LM380. It works as it should ~ 650 mW @ 12V 8 ohm, 

or 1W @ 12V 4 ohm,  I = 15 mA no Audio  150 mA @ 1W out.  Gain 34 dB. Whit a litel 4 ohm speaker it sounds realy hard with 1 KHz ton. Frequency ressponce -3dB @ 165 Hz 0 dB @ 100 kHz.

On satterday i solder the preamplifier NE5534 clipping @ 250 mV out. The LM380 neds only 40 mV in

so this is ok Gain 28 dB  Frequency ressponce -3dB @  400 Hz and 2,4 kHz locks promising.

Together NE5534 + LM380 give a gain of 60dB measured.

Stay tuned next i put out a block diagram.

This is the homemade PCB for MF EDEN 20, i made it on to Thursday evning.  160*91 mm.

i use the cad ExpressPCB.